How to Lock a Channel on a Sector

EDX SignalPro licensed with one or all the modules below will require a channel plan template file. For information on the following modules, please contact your Sales Account Manager.

  • LTE

  • LoRa

  • WiMAX

  • Mobile/Cellular

If you do not have a channel template, you will be able to create one within SignalPro.

You can create/edit a channel plan template file by going to the menu Utilities>Create/edit Channel plan template (.cpt) file.

 

Channel Plan Template

Within the dialogue, you can see a preview of .cpt files by selecting the “Open…” button.

To create a new channel, simply click the “Add Channel” button in the upper right corner. This will bring up a dialogue that will allow you to change the values of that specified channel.

The “Channel No” is just a numerical identifier for this channel; this is also known as the paired downlink. The paired uplink and downlink will match, depending on the circumstances or system you are designing.

The “Channel Use” option can have 3 different options. U for only uplink, D for only Downlink, or T for TDD or shared which includes both uplink and downlink. You will set your proper “Frequency” and “Bandwidth.” The “Data Rate” option is only relevant if you care about data rate in your results. The “Tx and Rx PSD codes” are only used when the user has a PSD code file they are trying to use. “CIN Ratio” is the carrier interference noise ratio. If the user knows a value relevant to their system, they may enter; otherwise, you can just leave this alone.

You can create or edit as many channels as to be used in your system.

To use the channel plan template file, you will want to go into the appropriate module menu and into the System Details/Service Area option.

For Example:

To utilize your channel plan template file for WiMAX you will go to Network Design/Analysis>WiMAX Networks>System Details/Service Area.

You will point to your .cpt file from this menu:

To lock a channel on a sector:

  1. Go into the site properties, highlight the sector of interest, press the channels/traffic button down towards the bottom.

  2. Under Automatic Channel Assignment Options you will click the button next to “Lock-in number of channels and specified channels.”

  3. Click on the individual channel to make changes. The red highlighted channel is the currently locked-in channel.

If you do not have one of the modules listed above, you can still follow this same process of how to lock channels to sectors. But instead of pointing to the .cpt file in a specific module menu, you would point to your .cpt file from the menu RF Systems>Generic System Channel Plan…

 

For any further issues or questions regarding Channels/Channel Plan Templates, please create a support ticket by visiting our Support Portal: https://edxwireless.atlassian.net/servicedesk/customer/portal/2

Still need help?

Contact us through our support portal!