Incorrect results in Mesh

When working with mesh projects, often the various meter types you could be using are most likely limited on range based on each individual meter type. When this is the case you will want to be sure and select the “Limit range based on meter type” switch. This switch is not turned on by default, it must manually be selected from within the “Set up Link Propagation for single Router calculations…” menu. The menu and switch are highlighted here:

IF the switch is not turned on then your meter ranges will be based on the global range settings we can see in this same menu.

It is common for this switch to be looked over, so if you are ever experiencing odd results or incorrect results be sure to come back to this menu and double check you have the appropriate switch checked on. If this switch is on and you still have trouble with your results, please review the knowledge base for additional Mesh articles. Or you can create a support ticket here: https://edxwireless.atlassian.net/servicedesk/customer/portal/2