There is a new feature that has been introduced into the Mesh Module for SignalPro version 11.0.13. This feature is a new switch labeled “Run Serial”. The purpose for the run serial feature is to help speed up topology reports for machines that may have limited memory, or for very large projects as well. The user can check this switch on and what the calculations will do is go through each router to meter connection during the propagations one at a time. If the switch is NOT turned on, the software will run the calculations for each router to meter connection all at once. For users with 16GB RAM, you will want to se sure and set this run serial switch as active. Also 32GB RAM user with very large projects, may want to turn this switch on as well. The switch is highlighted in the image:
