New User Setup
If you’re new to EDX Wireless, you'll be receiving link to your installer download and possibly a USB hardware key shortly after your purchase.
...
| Note |
|---|
Don’t plug the USB Key in before running setup! Doing so can cause the key to be associated with the wrong device drivers, making the key unable to be recognized by the software. Wait until after install to insert the USB Key. |
...
Starting the install
Extract the .zipped installer EDX provided. Open the unzipped folder and double-click setup.exe
...
| Note |
|---|
The license agreement must be accepted in order to install and use the EDX software. |
Choosing Features and Install Directory
...
On this screen, you can select which features to install, as well as choose the install directory.
...
Once your options are in order, click Next > to continue.
Finishing Up
...
Before continuing, you’ll be asked to confirm your selections. If you’re ready to go, click Install.
...
Once you see this screen, you can click Finish to exit the setup.
Cirrus Licensing Subscription (Keyless Configuration)
If you have cirrus licensing turned on, no further set up is needed.
Green
...
USB Key Installation (Stand-Alone Configuration)
No special steps needed. Just plug the key in after the above installation finishes.
Red USB Key Installation (Network Configuration)
When using a networked configuration with EDX software, there’s a small amount of additional setup needed to get started. Specifically, you’ll need:
...
Ensure there are no USB Keys installed in any USB port on the computer.
Navigate to C:\Users\<your name>\Downloads\Sentinel_LDK_Run-time_setup\Sentinel_LDK_Run-time_setup
Double click on the HASPUserSetup
Allow this device to make changes to your computer
Click next , then click accept, then click next, and finally click finish
Plug in the red USB key.
| Info |
|---|
If the USB key lights up and Windows notifies you that your new hardware is ready to use, then your drivers have been successfully installed! |
...