...
The settings on the dialog are very import. These are used to calculate the receiver noise. The receiver bandwidth and the receiver noise figure are used to calculate receiver noise power (P) .= using the following formula:
...
User can select to use noise only, interference only, or use both interference and noise.
User can include MIMO gain as defined in: https://help.edx.com/help/mimoadaptive-antennas
Distance limit the best server as defined by approximate sector range in the Study sector dialog of the Site Details dialog:
Area study threshold
Area study threshold is a very important parameter. It limits a study to only consider point to be calculated that exceed a certain received power level from the desired base stations. Raising and lowering this threshold can inadvertently highlight or disguise areas of interference. It is recommended that the minimum received signal for lowest order of modulation be used.
...
Minimum display threshold set to -120 dBm
...