General Controls | Input |
---|---|
Kills any current state or action | <Esc> |
Activate copy mode | <Ctrl> |
Cursor/Map Movement actions | Input |
---|---|
Move the Reference Cursor to the current cursor location | <Enter> |
Center the map on the current point | <Ctrl> |
Move the cursor around the screenArrows: Up, Down, Left, Right | |
Undo Pan and Zoom | <Ctrl> |
Redo Pan and Zoom | <Ctrl> |
Zoom In/Out | Mouse Scroll Wheel |
Increase the Zoom In/Out factor |
|
Center the map | Double-click left mouse Left button |
Print the current map window | <Ctrl> |
Project actions | Input |
---|---|
Create a new project | <Ctrl> + N |
Display the open project dialog | <Ctrl> + O |
Save the current project | <Ctrl> + S |
Run selected studies for all Views | <Shift> and Calculate Study button |
...
Equipment Movement | Input |
---|---|
Move the selected TX site | Left mouse button + <Shift> |
Move the selected CPE | Left mouse button + <Shift> |
Move the current Link | Left mouse button + <Shift> + L and drag mouse. To snap link to a TX site, right-click near a TX site and select to snap to site. |
Move the site label associated with a site | While hovering over label, press and hold <Ctrl> + <Shift> + Left mouse button, then drag label to new location. |
...