EDX SignalPro licensed with one or all the modules below will require a channel plan.
...
Within the Dialog, you can see sample cpt files by selecting the “Open…” button.
ADD here how to make a channel plannerTo create a new channel simply click the “Add Channel” button in the upper right corner. This will bring up a dialogue that will allow you to change the values of that specified channel.
...
The “Channel No” is just a numerical identifier for this channel, also this is known as the paired downlink as well. The pair uplink and downlink will match depending on the circumstances or system your designing. The “Channel Use” option can have 3 different options. U for only uplink, D for only Downlink, or T for TDD or shared which includes both uplink and downlink. You will set your proper “Frequency” and “Bandwidth”. The “Data Rate” options is only relevant if you care about data rate in your results. The Tx and Rx PSD codes are only used when the user has a PSD code file they are trying to use. “CIN Ratio” is the carrier interference noise ratio, if the users knows a value relevant to their system they may enter, otherwise you can just leave this alone.
You can create or edit as many channels as to be used in your system.
To use the channel plan template file, you will want to go into the appropriate module menu an be sure to point to your .cpt file.
...