EDX Wireless is proud to introduce their latest 5G RF Planning Module. The latest addition to SignalPro enables RF engineers to plan their 5G networks for any use case and spectrum
...
Carrier Aggregation, Modeling per sector.**** add note or take it out
5G IMT-2020 have defined 3 use cases that tackle industry issues, these being enhanced mobile broadband (eMBB), Ultrareliable low-latency communications (ULRCC) and massive machine type communications (mMTC)
...
These frequencies range as the following;
● Low band: 410 MHz to 1 GHz.
● Limited capacity with large area coverage and indoor penetration.
...
● Required to create greater equality between urban and rural broadband connectivity
● MidMid-band: 1 GHz to 7 GHz.
Good for urban deployment with increased capacity.
Peak data rate tops out at approximately 2 Gbps.
The majority of commercial 5G networks are relying on spectrum within the 3.3-3.8 GHz range
● High band: 24 GHz to 100 GHz (mmWave).
Limited coverage with potential for very high capacity.
Peak data rate tops out at approximately 10 Gbps.
...
To plan your 5G network the 5G module of Signalpro SignalPro should be used. Whether it is sub 6 or MMwave mmWave frequency , apply any FR1 and FR2 requirements for the spectrum you own, bandwidth, SCS, numerology, along with your vendor MIMO configurations and equipment to represent the most accurate propagation and study analysis on different areas (rural, urban etc.)
Also see other 5G articles