Within the Mesh Module there are two different ways to add repeaters into a design. This applies for both Bridge and Base repeaters in the tool. Both types of repeaters first need a file put together in order to automatically place these repeaters down. The easiest way to build this repeaters file is to gather all of the latitude and longitude coordinates for these repeater locations and arrange them in a .csv file in the EDX Towers/Poles format.
For information on the Tower/Poles format, please review the reference manual. You can quickly search for the format in the manual by pressing ctrl + F and typing Towers/Poles.
Once the repeater file(s) are put together and pointed to from within the Repeater Options menu of MegaMesh, you can proceed to run the Mesh studies.
After the mesh studies are completed, there is a possibility of needing to add additional repeaters in the design. You can automatically add repeaters through the buttons highlighted in the image:
ARP options… will bring up the Automated Repeater Placement Options which is also visible in the image.