Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

There are two types of keys:

  1. Stand alone Standalone key

    • Green HASP key or Purple USB key

    • Refered Referred to as a "local" key.

Info

This key must be plugged into the computer that is running the EDX software. It authorizes the use of the software on that computer only.

  1. Network key

Note

If for some reason the computer running the EDX software loses connection with the Network key, it is possible that the license that was in use won't get "checked in" and become available for other users. To avoid this, there is a Time Out setting in the "edx.ini" file found in the C:\programdata\EDX\CONFIG folder where the program is installed on each computer. The line "minutes_idle_time=" allows you to set he the maximum time that the license started by this computer is held until the License Manager assumes it has been abandoned. If a running copy of the program is not being used (running studies, etc.), it is considered to be "idle." . Typical time-outs might be on the order of an hour or so (60 - 120 minutes). If it is too short, the license might time out while someone is working with the program and their license might be picked up by somebody else. If this happens, their program would shut down the next time they tried to do a Save or Run a Study, for example. You can go to the computer with the Network key and restart the License Manger Manager program/service. This will cancel all licenses that are checked out.

...

Info

If no local or network key is found, the user usually sees a "Hasp error 15." . The Hasp error codes are listed in Chapter 18 of the Reference Manual. The user can install the program on as many computers as they like. The program will not run until it can find a valid hardware key (either local or network).

For more information on how to use keys, please refer to Licensing Scenarios