...
Most of your basic Router/AP/Transmitter information can be gathered from within the Sectors or Site data tabs from the Spreadsheet Editors menu. This can be found under RF Systems>Spreadsheet Editors. The Site and Sectors data spreadsheet editors will contain all RF equipment information , and location information.
From within the MegaMesh Menu, and Run Mesh Studies, you also have the capability to run a Report for all routers after running the studies. Then you can also print that same report and view it in a .txt file as well. This report shows what routers have how many meters and what meter types connected to them at which hop level.
...
The meter information can be pulled from the Edit Meters button. The edit meters menu contains a button labeled Show Results“Show Results”. If you press this button after running your mess mesh studies, you will see new columns populated that show the study information/results.
...
You can also go into the Specify Small Cell/Meter Equipment button and use some of the “tools” to get a report on terrain or clutter for each meter and meter type as well.
Repeater
Repeaters in SignalPro are designed or considered as meters, we model the repeaters as a specific meter type. In the RF world repeaters could also be Routers. In those instances we still model the repeater as a meter in SignalPro, but in order to get the information you want for the meter. You will need to sort the results of your meters by meter type. Knowing your meter type for repeaters will allow you to quickly sort the data and get the information you want for the repeaters.
...