There are multiple ways to assign Servers & Channels to CPEs
...
Users have the capability to both manually and automatically assign servers/channels to their CPEs. The automatic channel assignment requires the addition of the one of the network design modules; Mobile & Cellular, WiMAX, LTE/LTE-PRO, 5G.
Users can manually edit the CPE details directly.
Edit groups of CPEs in bulk using the spreadsheet editor.
Automatically using Multipoint Sector Assignment & Channel Planning (Network Design Module(s) required)
Manually edit the CPE details directly
From the map window:
Right click on a CPE → Details…
OR
From the menu:
RF Systems → CPEs… → Edit Group… → Select CPE → Edit CPE…
...
The Server ID can be assigned by selecting an existing Sector from the dropdown.
The channel can be assigned by selecting an existing channel from the dropdown.Users can access the CPE details menu through the menus RF Systems>CPEs. Highlight the specific group of CPEs to be edited. Then highlight the specific CPE and press Edit CPE to open the CPE details menu.
...
Users can also access the CPE details menu through the main map view. Hover the mouse pointer over the specific CPE and right-click to access the menu where users can jump into the CPE details for that CPE, along with several other functions.
...
Edit groups of CPEs in bulk using the
...
Spreadsheet Editor
From Under the menu: RF Systems
...
menu is the Spreadsheet Editor. The Spreadsheet Editor allows user to mass edit their sites/sectors/cpes/links. To assign or edit channels for CPEs users will go into the CPE details section of the Spreadsheet Editor. Look for the Assigned Server Cell ID column to adjust the assigned channels for those CPEs.
...
Automatically using Multipoint Sector Assignment & Channel Planning
From the menu:
Network Design/Analysis → Multipoint / Backhaul Networks → Assign Servers & Channels…
...
From here it is possible to automate the assignment of servers, channels, or servers & channels simultaneously.If the user has access to one of the Network Design Modules then it is possible to automatically assign servers and or channels. This is found under the menu Network Design/Analysis>Multipoint/Backhaul Networks>Assign Servers & Channels. If this menu is greyed out, the user does not have access to one of the Network Design Modules.
...
For additional questions regarding CPE channel assignment, please create a support ticket here: https://edxwireless.atlassian.net/servicedesk/customer/portal/2