Content Comparison

...

This will open the LTE-PRO Import GUI

2. LTE-PRO Import

For first time import First time importing a network into the RAN Node, a template is provided for the user to follow, ensuring the correct format is used

By default this template is saved in the project folder in a “RANNODE” folder. This template should can be opened and saved onto a local drive saved in any location the user desires

The system will automatically name the file, the user should rename for personalization

3. RAN Node File- Introduction

...

Currently this is downlink only, uplink will be released in future release

Definitions

EPRE
- Energy (power) allocated to one RE is called EPRE (Energy Per Resource Element)
- EPRE indicate power for one resource element (RE). This can be used for any channel (e.g, Reference Signal, PDSCH etc). This value does not vary with system bandwidth or number of RBs.
RS EPRE
- Reference Signal Energy Per Resource Element
SS EPRE Offset
- Secondary Synchronization Signal Energy Per Resource Element
PDSCH EPRE Offset
- Physical Downlink Shared Channel, Energy Per Resource Element
PBCH EPRE Offset
- Physical Broadcast Channel, Energy Per Resource Element
PDCCH EPRE Offset
- Physical Downlink Control Channel, Energy Per Resource Element
PDCCH Overhead
- Physical Downlink Control Channel Overhead

Note- these settings are not mandatory to the import of the network

...

This tab is to define all the various technology profiles for the network

Definitions
- Name of the technology - user defined
- System Profile - Band
- SCS - subcarrier spacing
- Bandwidth - bandwidth of system
- Cyclic Prefix- normal or extended
- FDD or TDD (in case of TDD, new template should be created to define the pattern)
- Uplink CQi - see step 8
- Downlink CQI - See step 8